Products
Building and Construction
Architects, structural engineers and contractors around the world cooperate with Fabreeka International. They value the engineered material solutions as well as the company's expertise in reducing structure-borne noise, vibration and thermal bridging.
Fabreeka routinely provides a dynamic analysis of steel support structures, including a vibration survey and analysis, to determine current vibration levels and finite element analysis (FEA) to predict resultant vibration for a recommended solution. Add an extensive product portfolio to these services and Fabreeka can offer one-stop vibration control and structure-borne noise solutions for a myriad of applications relative to building and construction. They include elevator isolation, stack vibration dampers to reduce vortex shedding on stacks or towers, fixed or expansion bearings for bridges and buildings, structural and non-structural thermal bridging solutions, and foundation isolation.
Bridges
Flexibility and movement are a necessity in bridge construction, whether a steel-bridge, a concrete highway overpass, or a bridge for a railroad. Without the ability to flex and move, the structural integrity of the bridge can be compromised, and eventually lead to failure. Fabreeka supplies bearing pads, both fixed and sliding, for bridges around the world. Fixed bearing pads, such as Fabreeka preformed fabric bearing pads and SA-47 random oriented fiber bearing pads are used on bridges to support uneven load and rotation on steel to steel or steel to concrete connections. These bearing pads, also known as bedding pads, provide uniform load distribution on highway and railroad bridges and reduce vibration by adding damping to steel structures. Fabreeka’s expansion bearings, or slide bearings, can be used on steel and precast concrete bridges. They offer a durable sliding surface with a low coefficient of friction to allow for thermal expansion and contraction in bridges to minimize structural stresses. Fabreeka type SBX expansion bearings include the company's own preformed fabric bearing pads to allow beam rotations created by loads. SBX expansion bearings also provide an even distribution of loads between members, and vibration is reduced by adding damping to steel structures. Fabreeka designs and manufactures custom expansion bearings to your specifications, including bearings with ultra-low coefficient of friction and bearings for high temperature applications.
Bridge Rail Pads
Fabreeka’s Bridge Rail pads have simplified the installation of railings as our SA-47 pad is supplied to the exact size and shape of the rail support contact area. This pad evenly distributes the loading and hold-down forces from the bolts by conforming to the irregularities of the surfaces in which it makes contact. Durable and dependable, Fabreeka bridge rail pads exhibit high compressive strength and a limited creep characteristic. These differentiating factors set them apart from the standard unreinforced neoprene pads, as well as making them a great alternative to epoxy and grout installations.
Lamp Post Pads
Fabreeka’s Lamp Post pads are an excellent and economical way to reduce shock and vibration induced by wind and traffic. Depending on the height of the pole and state specifications, pads made of either Fabreeka pad or SA-47 are supplied to the exact size, shape and bolt hole-pattern of the lamp post base. Lamp post pads help to evenly distribute loadings and adapt to any irregularities in the concrete mounting surfaces while providing damping to reduce post motion. Additionally, Fabreeka washers and bushings are utilized to completely isolate the lamp post from transmitted vibration.
Drain Trough
Fabreeka’s Drain Trough material is manufactured into a flexible water drainage system for use on bridges and overpasses. Designed for installation under the expansion joint fingers, these flexible troughs channel water into rigid down spouts and avoid water dripping on vehicles passing under bridges.
Buildings
For decades, Fabreeka International has been successful in vibration isolation and reducing structure-borne noise in buildings. With the combined effort of our expert engineering staff and an extensive selection of materials, we provide solutions to the many needs and challenges facing construction in the modern world. Our fixed bearing pads, whether Fabreeka or SA-47, support uneven load and rotation in steel to steel or steel to concrete connections, and provide even load distribution between members. Bearing pads reduce vibration on building floors, diminish structure-borne noise, and protect structural integrity by absorbing movement and deflection caused by movement. Fabreeka provides structural expansion bearings, or slide bearings, for numerous building applications. These expansion bearings allow thermal expansion of beams and other members, and they permit beam rotations caused by loads and have a low coefficient of friction which minimizes structural stresses. A building’s foundation can also require isolation from external vibrations such as traffic, trains, subway cars, or nearby construction. Fabreeka has several foundation isolation products to isolate the building base from these disturbing influences. Internal sources of structure-borne noise and vibration in buildings can come from mechanical rooms or elevator rail cars. Fabreeka reduces these noise and vibrations to provide a more serene environment for adjacent penthouses, offices, hotel rooms, or any other living spaces that could be adversely affected. Today’s engineers and architects are well aware of the benefits of energy efficiency. One way to enhance energy performance is by adding a Fabreeka-TIM structural thermal break, which is a load bearing thermal break that is used between flanged steel connections. This energy saving product maintains structural integrity while reducing energy transfer through the building envelope. This thermal bridging solution can be used on balconies and canopies, or other steel members protruding through the building envelope. For structural connections in compression, such as column bases, roof equipment, dunnage post support, and foundation connections, Fabreeka-TIM RF can be used to reduce thermal energy transfer. Additionally, Fabreeka-TIM series products can bring you a step closer to achieving LEED certification.
Towers
Steel stacks and towers have relatively low inherent structural damping; therefore, excessive top-of-stack deflection can happen at critical wind speeds due to vortex shedding. To keep deflection within acceptable parameters, damping must be added to the “stack-foundation-soil” system. One way to achieve this is with stack foundation dampers. A ring of Fabreeka preformed fabric pad is placed between the stack base plate and concrete foundation. Additionally, Fabreeka washers are installed between steel washers/plates under the anchor bolt nuts. Introducing damping to the structure minimizes amplification at resonance, therefore creating a more stable structure.
Energy
Engineers in almost all industries and many applications have to deal with unwanted vibrations. The energy sector is no exception, and with our increasing environmental awareness the demand to reduce noise and vibrations increases. Fabreeka is an established partner in this field. The company has developed and supplied solutions against transformer vibration and for transformer noise isolation for decades as well as consulting customers all over the world in finding the right products for pipe isolation, gas compressor isolation and the isolation of components of wind turbines.
Turbines, transformers or pipes equipped with Fabreeka products perform more efficiently and have a longer life while work crews can operate in safer, quieter environments. Fabreeka components help protect these important systems during their extended use in often very harsh environments by isolating vibrations and protecting people.
Oil and Gas
A major problem facing companies with gas transmission and petrochemical piping is fatigue failures caused by vibration. High frequency, namely ultrasonic and hypersonic gas pulsations at natural gas transmission line compressor stations, causes metal fatigue in piping, supports and pipe clamps. To eliminate excessive vibration, a properly designed mechanical restraint is required.
The application of Fabreeka Preformed fabric pad with high damping within these mechanical restraints can provide isolation of piping vibrations, thermal flexibility, and reduction of unwanted noise and prevent non-uniform clamp contact pressure. Fabreeka Pad is available in a range of thicknesses to accommodate any design application and is available with a PTFE Teflon® surface for thermal expansion and insulation for high temperatures. To allow thermal expansion without fatiguing piping and clamps, Fabreeka expansion bearings are often fitted under pipes.
In line with the need of pipe and gas compressor isolation, vibration is also present on drilling rigs. Created by mud pumps, compressors, generators and other rotating equipment, the vibration from the equipment is transmitted to the decks on the rig. Fabreeka provides isolation materials for drilling rig equipment to make the rig as quiet as possible and reduce structure fatigue.
Power Generation
For decades, Fabreeka isolation materials have been used to control structure-borne vibration and noise generated from power and distribution transformers and reactors. With alternative energy generation on the rise, Fabreeka pads, Fabcel pads and isolation washers and bushings are now widely used in wind turbines to provide vibration isolation under gear boxes and generators. Fabreeka isolation products are also the material of choice to prevent metal to metal contact on rotating parts with the rotors to reduce wear and fatigue.
Moreover, Fabreeka engineers work with consultants who design power generation facilities involving steam and gas turbine foundation isolation and other turbo-machinery vibration attenuation requirements.
When it comes to transformer noise isolation and vibration isolation, engineers can choose from a variety of standard vibration isolation mounts for small transformers that may weigh up to 10,000 lbs. Fabreeka also offers custom solutions for large transformers in transformer yards. They all have in common that they reduce noise and vibration for both single phase and three-phase transformers and protect concrete from fatigue due to vibration. Another benefit is the reduction of noise by 3 to 5 dB on average which may be increased to a reduction of 8 dB depending on transformer configuration.
For turbine vibration isolation as well as for engine generator isolation countless clients in many countries have chosen Fabreeka pad, Fabreeka washers and bushings and Fabcel pad. Foundation isolation products such as FAB-EPM, FAB-EFP and Fabsorb are also in use for the isolation of engine generators. For the latter turnkey solutions are available, including demolition, foundation design and concrete construction.
Engineers in almost all industries and many applications have to deal with unwanted vibrations. The energy sector is no exception, and with our increasing environmental awareness the demand to reduce noise and vibrations increases. Fabreeka is an established partner in this field. The company has developed and supplied solutions against transformer vibration and for transformer noise isolation for decades as well as consulting customers all over the world in finding the right products for pipe isolation, gas compressor isolation and the isolation of components of wind turbines.
Turbines, transformers or pipes equipped with Fabreeka products perform more efficiently and have a longer life while work crews can operate in safer, quieter environments. Fabreeka components help protect these important systems during their extended use in often very harsh environments by isolating vibrations and protecting people.
Oil and Gas
A major problem facing companies with gas transmission and petrochemical piping is fatigue failures caused by vibration. High frequency, namely ultrasonic and hypersonic gas pulsations at natural gas transmission line compressor stations, causes metal fatigue in piping, supports and pipe clamps. To eliminate excessive vibration, a properly designed mechanical restraint is required.
The application of Fabreeka Preformed fabric pad with high damping within these mechanical restraints can provide isolation of piping vibrations, thermal flexibility, and reduction of unwanted noise and prevent non-uniform clamp contact pressure. Fabreeka Pad is available in a range of thicknesses to accommodate any design application and is available with a PTFE Teflon® surface for thermal expansion and insulation for high temperatures. To allow thermal expansion without fatiguing piping and clamps, Fabreeka expansion bearings are often fitted under pipes.
In line with the need of pipe and gas compressor isolation, vibration is also present on drilling rigs. Created by mud pumps, compressors, generators and other rotating equipment, the vibration from the equipment is transmitted to the decks on the rig. Fabreeka provides isolation materials for drilling rig equipment to make the rig as quiet as possible and reduce structure fatigue.
Power Generation
For decades, Fabreeka isolation materials have been used to control structure-borne vibration and noise generated from power and distribution transformers and reactors. With alternative energy generation on the rise, Fabreeka pads, Fabcel pads and isolation washers and bushings are now widely used in wind turbines to provide vibration isolation under gear boxes and generators. Fabreeka isolation products are also the material of choice to prevent metal to metal contact on rotating parts with the rotors to reduce wear and fatigue.
Moreover, Fabreeka engineers work with consultants who design power generation facilities involving steam and gas turbine foundation isolation and other turbo-machinery vibration attenuation requirements.
When it comes to transformer noise isolation and vibration isolation, engineers can choose from a variety of standard vibration isolation mounts for small transformers that may weigh up to 10,000 lbs. Fabreeka also offers custom solutions for large transformers in transformer yards. They all have in common that they reduce noise and vibration for both single phase and three-phase transformers and protect concrete from fatigue due to vibration. Another benefit is the reduction of noise by 3 to 5 dB on average which may be increased to a reduction of 8 dB depending on transformer configuration.
For turbine vibration isolation as well as for engine generator isolation countless clients in many countries have chosen Fabreeka pad, Fabreeka washers and bushings and Fabcel pad. Foundation isolation products such as FAB-EPM, FAB-EFP and Fabsorb are also in use for the isolation of engine generators. For the latter turnkey solutions are available, including demolition, foundation design and concrete construction.
KEY FEATURES/BENEFITS
- Fabreeka SBX type structural expansion bearing is designed using Fabreeka-PTFE pad in the lower unit to accommodate large rotations and high reaction loads
- SBX type bearings meet AASHTO and State DOT specifications for fabric reinforced bearings pads with PTFE sliding surface
- TTX and STX type bearings can use a filled or unfilled PTFE surface as required
- For corrosive conditions, SBX, STX and TTX type slide bearings are available in Stainless Steel
Fabreeka structural expansion bearings, or slide bearings, accommodate thermal expansion and structural rotation in buildings, bridges and pipe supports. Fabreeka designs and manufactures several types of expansion bearings for a wide range of applications, also including Teflon® bridge bearing pads. The expansion bearings are supplied as an upper and lower unit prepared to be tack or stitch welded in the field.
Fabreeka SBX type expansion bearings are used when construction tolerances, high load, and rotation are prominent with beam spans being excessive. This bearing is the most resilient in our full line of expansion bearings.
STX type slide bearings are used when construction tolerances and loads are moderate. This bearing has a very low coefficient of friction which is exceptional for use where expansion is large.
TTX type slide bearings are used as well when construction tolerances and loads are moderate. This bearing has a higher coefficient of friction than the STX Bearing and is used where the expansion criterion is limited.
Fabreeka slide bearings can be made with holes and slots, if required, to allow for mechanical attachment of expansion units to steel structures or for anchoring to concrete structures.
Fabreeka also offers GGX type expansion bearings made with graphite to achieve effective performance in high temperature environments.
Download
Fabreeka® Expansion Bearings
Versatile and resilient slide bearings
Download
Slide Bearings and Expansion Bearings
for bridges, buildings and pipe supports
Download
Fabreeka® Solutions Overview
An overview and comparison of all our products in one brochure!
Related products
Fabreeka-TIM® RF Series
Light Load Structural Thermal Break
FAB-EFP®
Machine Foundation Isolation
FAB-EPM HP®
PU Foam for Foundation Isolation
Fabreeka-TIM®
Structural Thermal Break, Thermal Insulation Material
SA-47 Random Oriented Fiber Pad
ROF Bearing Pad, Masticated Rubber
Fabreeka® Preformed Fabric Pad
Cotton Duck Pad Meets MIL-C-882
Fabreeka-TIM® LT
Light Load Thermal Break
Fabreeka-PTFE
Bearing Pad
Fabcel® Transformer Mounts
Reduce Noise and Vibration from Transformers
Isolation Washers
Fabreeka, Fabcel or DIMFAB Material
FAQS
What do you recommend for an epoxy/adhesive to secure the Fabreeka-PTFE pad to the masonry plate? Fabreeka recommends #700 epoxy adhesive. Please see our Fabreeka #700 epoxy adhesive application sheet.
Are there installation instructions available? Yes. Please refer to our Fabreeka-PTFE bearing installation sheet.
When to I use an SBX, or TTX, or STX type expansion bearing? Please refer to our structural expansion bearing literature or contact Fabreeka’s Engineering department at 1-800-322-7352 or info@fabreeka.com for assistance.
What type/thickness PTFE should be used for the TTX and STX type bearings? The standard PTFE thickness is 3/32″ glass filled, etched on side for bonding. Other thicknesses/types are available upon request.
What is the maximum temperature that the SBX type bearing can be exposed to in a pipe slide application? The maximum temperature is 400°F.
